Forge Dump Valve

Vovlo T5 Applications Forge Motorsport Performance Turbo Actuator

Vovlo T5 Applications Forge Motorsport Performance Turbo Actuator

Vovlo T5 Applications Forge Motorsport Performance Turbo Actuator

Volvo T5 Applications Forge Motorsport Performance Turbo Actuator. Brand New Forge Motorsport Performance Parts and Accessories.

This actuator is suitable for a number of engine installations in the 850, S60, S70, V70, C70 range. There are two variations of this actuator available, FMACT5S with a straight connecting rod, and FMACT5B where the rod has an offset or bend. Please see the fitment lists below to determine which version should fit your vehicle.

FMACT5S (Straight Rod) This is compatible with the models below, with the Bosch Motronic 4.3 / 4.4 ECU fitted as standard, as seen in models with an accelerator cable. The original actuator rod is straight and suitable for the Mitsubishi TD04HL straight flanged turbo. 850 R 1997 - 1998. 850 T-5 1997 - 1998. 850 T5-R 1997 - 1998. C70 T5 1997 - 1998. FMACT5B (Bent Rod) This is compatible with the models seen below with Bosch Motronic 7 and Motronic 7S ECU fitted as standard, as seen in models without an accelerator cable (drive by wire / ETM). The original actuator rod is stepped and suitable for the Mitsubishi TD04HL angled flanged turbo type. C70 (phase 1 and 2) 1999 - 2005.

V70 (phase 1 and 2) 1999 2004. S60 (phase 2) 2000 2004.

If you have a later K24 Turbo models (2004/2005/2006 and 2007) with a 6-speed manual or automatic gearbox, please see Forge Motorsport part number. Please state at checkout which actuator diaphragm or piston, rod straight or bent, and colour of spring required. Forge Motorsport was one of the first companys in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator.

Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, Forge soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car. Machined and hand polished in the UK. Choice of piston or diaphragm operation on most actuators. Nomex reinforced fluoro silicone diaphragms.

Laser-cut stainless steel brackets (where applicable). Tuning and service kits available. The actuator is available with the following coloured springs. The pressure figures listed above are the minimum regulated pressure figures. Please state at checkout which colour spring you require and whether you require a diaphragm or piston-type actuator. When you fit a Forge turbo actuator you will be able to fine-tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard-wearing nature of piston sealed valve internals.

Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.

In The Box: 1 x FMACT5 Actuator 1 x Forge Sticker. This actuator is built with a. We recommend all parts are fitted by a qualified mechanic to ensure the correct fitment, though this kit does include fitting instructions. See our shop for other Forge products plus 1000s more Performance Parts. You can see Part Werx legacy feedback via the old part werx profile.

Made with in Great Britain. Template Managed & Developed by Dev VIP. The item "Vovlo T5 Applications Forge Motorsport Performance Turbo Actuator" is in sale since Sunday, October 25, 2020. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Air Intake & Induction\Turbochargers". The seller is "vw-parts-international" and is located in Lincolnshire.

This item can be shipped worldwide.

  • Manufacturer Part Number: FMACT5
  • Brand: Forge Motorsport


Vovlo T5 Applications Forge Motorsport Performance Turbo Actuator