Forge Motorsport Turbo Recirculation Valve 25mm Bosch Diverter Valve Replacement
This valve is a replacement for the OEM valves under the part numbers; 06A145710N, 06A145710P, 0-280-142-114, 4441895 (Saab). World leading springs for more precise operation and consistency. All internal and external components have been made in the UK. Replaces the weaker plastic valve.
Pistons use heat stabilised Viton O-rings. Lubricated with high temperature Mobil1 grease. Fully serviceable and rebuildable in minutes.Unlike other valves on the market, ours produce no check engine lights (EML). The standard factory fitted Bosch valve was and still is prone to failure of the rubber diaphragm inside, leading to a boost leak.
20 years ago, Forge Motorsport recognised this common failing and developed an aluminum two piece replacement recirculation valve, utilising an aluminum piston as a replacement for Bosch plastic valve, (originally the FMCL007P). This valve soon became the most copied and imitated in the valve marketplace. The FMDV008 turbo recirculation valve is the result of 25 years of continued experience and engineering expertise. With the reputation for innovating and manufacturing the best automotive valves in the world, you can be certain that there is currently no better replacement valve available. Forge's recirculation valve features a greater flow rate than the OEM Bosch valve, as well as a faster response time, due to its revised design.By using the associated service kit FMDVSK. , as seen below, the life of the valve can be extended, and the performance can be maintained. With a lifetime guarantee, you can be sure the valve is reliable for your car.
It is fully customisable to fit your application with two uprated springs provided in the kit. Forge Motorsport's improvement on the original valve has a compact design, meaning easy fitment under the engine cover. The valve is assembled with a 25mm side pipe, and the vacuum port on the top of the valve is 6mm in size. 1 x Uprated Yellow Spring. 1 x Uprated Blue Spring.1 x 2.5mm Allen key. 2 x 35mm Hose Clamps. Note that the models listed here have either had the part fitted by us or a customer or they are listed as being compatible on industry parts databases.
Where it has not been directly fitted by Forge there will then be a separate May Also Fit tab where the make and model will also appear and which details our no-risk approach to purchasing this product, so it is worth checking there as well. Failure to supply this proof will result in your claim or enquiry being denied. Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away.We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water. Please leave a note at checkout with desired choice of.
If this is the case you will be contacted within 24 hours.