Forge Motorsport Dump Valve Kit for VW Audi Seat Skoda 1.0 TSI GTI
This valve kit allows the fitment of a fast response blow off valve on the VAG 1.0 TSI/GTI engine, including the VW UP. As the engine does not have a diverter valve fitted as standard, Forge Motorsport have developed a twin piston dump valve that not only gives you an.
When lifting off the throttle but it also. It is designed to help the turbocharger maintain its rotational speed ready for when you accelerate, as well as prolonging the life of your turbo. Due to the exposed position of the OEM boost pipe and the nature of an engines heat cycle, the plastic the OEM pipe is made from can deteriorate over time becoming brittle and susceptible to boost leaks. Totally replaces this plastic pipe. From turbo to manifold with a silicon hose (available in a choice of colours), and everything else you need to install the valve is included in the kit together with full instructions.
Anodised CNC machined billet couplers and components along with a tuneable CNC machined twin piston Forge Motorsport valve. Custom colours are available but will incur a 50% none refundable deposit and a lead time of 8-10 weeks.
Unlike other valves on the market the Forge valve will not bring on any check engine lights. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.
This ensures the colour of the silicon hose stays bright and vibrant and unlike our competitors will not deteriorate over time. We cannot guarantee that this product will fit with all aftermarket intakes.
Please note if you have the extra spout on your inlet pipe as seen in the picture below then this part will now fit your vehicle. Please note that the 2021 Engine may have some differences due to the map sensor and turbo charger coupler difference, please study the pictures below, if your map sensor and screw type coupler look like this pictured below, FMDV9 and FMDV18 are not compatible.
Note that the models listed here have either had the part fitted by us or a customer or they are listed as being compatible on industry parts databases. Where it has not been directly fitted by Forge there will then be a separate May Also Fit tab where the make and model will also appear and which details our no-risk approach to purchasing this product, so it is worth checking there as well. Failure to supply this proof will result in your claim or enquiry being denied.Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away.
We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system.
Be sure you never mix coolant and always use distilled water. Please leave a note at checkout with desired choice of. Hose Colour (Black or Blue or Red). If this is the case you will be contacted within 24 hours.