Forge Dump Valve

Forge FMDVR60R Recirculation Valve and Kit for Mini Countryman 2010 2016 Cooper

Forge FMDVR60R Recirculation Valve and Kit for Mini Countryman 2010 2016 Cooper
Forge FMDVR60R Recirculation Valve and Kit for Mini Countryman 2010 2016 Cooper
Forge FMDVR60R Recirculation Valve and Kit for Mini Countryman 2010 2016 Cooper
Forge FMDVR60R Recirculation Valve and Kit for Mini Countryman 2010 2016 Cooper

Forge FMDVR60R Recirculation Valve and Kit for Mini Countryman 2010 2016 Cooper
Forge FMDVR60R Recirculation Valve and Kit for Mini Countryman 2010 2016 Cooper S 1.6 Turbo Petrol N18. We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Our blow off valve is designed specifically for the Mini/Peugeot N18 engines including the Mini Cooper S 2011-onwards, Mini JCW Cooper S 2013-onwards, Mini R58 Coupe 2012-onwards, Peugeot 208 GTi late 2012-onwards, Peugeot 308 GTI, RCZ THP 156 & 200, 2011-onwards. This product is either recommended where the boost pressure has been increased by an ECU software upgrade, for those wanting a loud blow off sound, or simply as a solution to the many failures that have occurred. The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully, or not at all.

This doesn't always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem.

The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles and oil contamination, and eventually fails. This prevents the diaphragm from sealing with the same problems as mentioned above.

This particular failure also results in the valve falling apart upon removal from the turbo, though in extreme cases bits of plastic can enter the turbo and destroy it. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years. The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness which is included-as with all Forge products, this valve is guaranteed for life!

­ Great high quality product. Dont forget to check every now and then to see if it needs cleaning and new lube. Just by the valve service kit Forge sells and your good to go!

Full Vehicle Compatibility: Coming soon. WG Motorparts is built on our passion for cars.

We supply aftermarket car parts for all makes and models of vehicles. Our network of over 50 global manufacturers means that we can get the parts you need, when you need them. And because we deliver worldwide we can send those parts anywhere, direct to your door. So if you need a specific part or a custom package that isn't listed on our website yet, get in touch and we'll do all the work.

Get in contact with one of our knowledgeable support representatives today. Please be aware that some of our items are made to order and can carry extended lead times.

Upon receipt of your order please check the package and contents. "Item arrived quickly, no issues, will trade againfor sure".

"Happy, good postagedeal with anytime".


Forge FMDVR60R Recirculation Valve and Kit for Mini Countryman 2010 2016 Cooper