Forge BMW MINI Cooper S R55 R56 N14 Replacement Recirculation Valve Kit - FM207V. This valve is for the Peugeot / BMW Mini 1.6 Turbo engines, as found in the Peugeot 207/307/308 GT Turbo and BMW Mini Cooper S Turbo R56/57 models with the N14 engines. Mini R56 Cooper S 1598ccm 174HP 128KW Mini R56 John Cooper Works 1598ccm 211HP 155KW Mini R57 Cooper S 1598ccm 174HP 128KW Mini R57 John Cooper Works 1598ccm 211HP 155KW Mini Clubman R55 Cooper S 1598ccm 174HP 128KW Mini Clubman R55 John Cooper Works 1598ccm 192HP 141KW Mini Clubman R55 John Cooper Works 1598ccm 211HP 155KW This solution is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade, and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred.
The most common complaint on the OEM solenoid valve is a split diaphragm, which prevents the valve from opening fully, or not at all. This doesn't always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem (see image above). The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles, and eventually fails.This prevents the diaphragm from sealing with the same problems as mentioned above. This particular failure also results in the valve falling apart upon removal from the turbo; in extreme cases, bits of plastic can enter the turbo and destroy it. The alternative is a fully engineered solution offering both significantly improved reliability.
Our valve is piston based, with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years. The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness, which is included.Please note that all photos are for illustration purposes only, as designs / colours may differ when manufacturers make changes. We hate waste, so we have taken the decision to reuse as much packaging as we can to reduce the amount that we throw away. Please don't worry though; we will only reuse packaging if we are confident that it will offer the protection your item requires. Please note that this product may not be TÜV approved. We strongly advise that fitting appointments are not booked until the items have been delivered to you.
If ordering from abroad, please ensure items are legal / can be imported into your country. For MINI enthusiasts by MINI enthusiasts, bringing you top quality MINI Performance Parts, MINI Tuning & MINI Styling Products. Orranje Performance offer quality and affordable parts, with an aim to help you build your ideal MINI.
This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Valves, Valve Springs & Kits". The seller is "orranje-performance" and is located in this country: GB. This item can be shipped worldwide.