Forge Dump Valve

FORGE Blow Off Valve Dump valve for Hyundai Genesis FMDVHGA

FORGE Blow Off Valve Dump valve for Hyundai Genesis FMDVHGA
FORGE Blow Off Valve Dump valve for Hyundai Genesis FMDVHGA

FORGE Blow Off Valve Dump valve for Hyundai Genesis FMDVHGA

Billet aluminum construction - Viton silicone o-ring sealed piston-based internals - no diaphragm to fail - 3 interchangable springs and included shims to adjust for varying boost levels - o-ring sealed cap with swivel vacuum nipple - fully rebuildable. The Forge direct replacement blow-off valve is designed to be a more durable and performance oriented valve than the OEM unit. The OEM valve is suitable for stock boost levels for a period of time, however, once boost pressure is raised, and after prolonged use, the stock valve will no longer be adequate.

Raising the boost output of the vehicle will have a number of effects on the OEM valve. First and foremost, the additional boost pressure will quickly exceed the capacity of the OEM spring to keep the valve closed under higher boost levels. Since you cannot change the springs in the OEM valve, it cannot be adjusted for higher boost levels. Secondly, the additional heat generated by the increased boost will quickly deteriorate the OEM rubber valve diaphragm, which will also lose strength with repeated oscillations.

The Forge valve uses full billet aluminum construction and Viton silicone o-rings that will withstand the highest boost levels and repeated abuse. It is also tunable for varying boost levels with the included spring tuning kit. If there is ever a problem with the valve such as a torn o-ring, replacements are available free of charge, and the valve is fully rebuildable. Because the Genesis Coupe 2.0T does not use a MAF (mass air flow) sensor, there is no reason that the residual boost pressure at throttle lift cannot be vented to the atmosphere such as with this valve. The engine management does not meter the air volume entering the engine, so this residual pressure can be discharged without any adverse affects on the performance or driveability of the vehicle. Additionally, the valve being open at an idle or vacuum condition is a normal occurance, and is not indicative of a leaking valve. If the intake manifold is in vacuum, even while cruising at speed, the valve may be open. The OEM valve operates in this same manner, however, it is just not visible/audible because it is recirculating instead of vented to the atmosphere.

Using a stiffer spring to keep the valve closed at a vacuum condition may result in too stiff of a spring tension to effectively discharge pressure at a throttle lift condition. We are dedicated to ensuring the highest possible quality service to our customers, always going above and beyond! See the tabs below for more information about us and our policies.

We are a family run business started back in 2004 offering car customising and performance products from top brands such as Forge, K&N, Bailey, Wossner, Walbro, Gaz, The Loudest and many more. We also have products manufactured for ourselves and these are made to the highest standards. Over the past 9 years here at Motorbling we have also expanded our product range into standard replacement parts such as Brakes Pads from EBC and Wing Mirrors from Lucas, so we can now offer everything you need, from customising, to performance to standard replacement parts for MOT'S and general repairs. We offer fantastic service and discounted prices so why shop anywhere else. For most items, you have the right to return your goods within 30 days of receiving them.

However, this right does not apply to items that have been altered upon request, have missing labels or show signs of being used. If you wish to return goods using this right, you need to inform us within 21 days of receiving the goods.

You must take reasonable care of the goods and immediately return them at your own expense. Please ask for a "Proof of posting certificate" as we cannot be held responsible for goods that go missing whilst in transit.

If you think weve sent you the wrong item or size, please double check the full description in the listing, including the UK size before requesting a return. The item "FORGE Blow Off Valve Dump valve for Hyundai Genesis FMDVHGA" is in sale since Wednesday, March 24, 2010.

This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Air Intake & Induction\Dump, Bypass & Blow-Off Valves". The seller is "motorbling" and is located in GB. This item can be shipped worldwide.

  • EAN: Does not apply
  • Part Manufacturer: Forge Motorsport
  • Brand: Forge Motorsport
  • Part Manufacturer Number: FMDVHGA
  • Manufacturer Part Number: FMDVHGA
  • MPN: FMDVHGA


FORGE Blow Off Valve Dump valve for Hyundai Genesis FMDVHGA